Features of Semi-automatic LED Solder Paste Printer GSD-YS1200

1. Microcomputer control, touch screen display, menu operation interface.

2. The scraper floats. (Similar to a fully automatic printing machine, the scraper can freely float up and down and automatically adjust to the level of the steel mesh).

3. The pressure of the squeegee is adjustable, (the pressure of the squeegee on the steel mesh can be adjusted according to the length of the different types of squeegee).

4. The steel mesh is automatically demoulded when leaving the PCB board, adjustable from 0 to 5 seconds.

5. The working operation adopts two-hand key switch operation, which is safe and reliable.

6. In the touch screen menu, the time for the scraper to stop at the top left and bottom left, the time for the top right stop and the bottom right stop, and the time for the overall stop and stop of the steel mesh can be independently set.

7. The positioning and fixing methods of PCB board include reference hole positioning, reference edge positioning and reference hole positioning at the same time, template positioning and other different precise positioning forms.

8. The touch screen is equipped with time display function, automatic counting function of printing times, and screen protection function.

9. Equipped with left and right scraper speed adjustable function and emergency stop safety function.

Technical parameters of semi-automatic LED solder paste printer GSD-YS1200

PCB size Max:L1200*W240mm

Printing table area L1300*W320mm

Positioning method Reference needle

Table fine adjustment front/rear ±mm, left/right ±10mm

Printing accuracy ±0.2mm

Repeat accuracy ±0.2mm

Basic board thickness 0.2-2.0mm

Air source 4-6kg/cm2

Power supply AC220V 50HZ/60HZ

Dimensions L1600*W700*H1700mm